DTC Lookup

B13D4 DTC

Insufficient remote transmitter programming number

Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector

Possible Causes

  • 1. Insufficient number of remote transmitters programmed (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [SECURITY AND LOCKS] .) Note
  • Due to immobilizer system characteristics, the ignition/main power cannot be switched ON unless two or more keys are programmed. 2. Body control module (BCM) malf

BCM

B13D4:00 [BCM]

SM3339495

id990210120300

System malfunction location

Insufficient remote transmitter programming number
Detection condition
• The body control module (BCM) detects that the number of programmed remote transmitters is less than 2.
Fail-safe
• Not applicable
Possible cause
1. Insufficient number of remote transmitters programmed (See IMMOBILIZER SYSTEM-RELATED PARTS PROGRAMMING [SECURITY AND LOCKS].)
Note
• Due to immobilizer system characteristics, the ignition/main power cannot be switched ON unless two or more keys are programmed.
Repeatability verification procedure
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
System wiring diagram
• Not applicable