B12A8:2A [DASH_ESU]
id990260825700
| System malfunction location |
Telescoping position sensor circuit malfunction |
|---|---|
|
Detection condition
|
• The dash-electrical supply unit detects that telescoping position sensor signal circuit malfunction.
|
|
Fail-safe
|
• Inhibits the driving position programming, recall, and delete.
|
|
Possible cause
|
1. Malfunction in wiring harness (including connector/terminal) between telescoping motor/telescoping position sensor and electric tilt/telescoping control unit (See CIRCUIT INSPECTION.) (See CONNECTOR INSPECTION.)
2. Telescoping position sensor malfunction
3. Electric tilt/telescoping control unit malfunction
4. Dash-electrical supply unit malfunction (Refer to [DASH-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION] in workshop manual.)
|
|
Repeatability verification procedure
|
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
2. Operate the telescoping motor.
|
 |
|
|
1
|
Electric tilt/telescoping control unit
|
|
2
|
Telescoping motor/telescoping position sensor
|