B1207:09 [BCM]
id990210114400
| System malfunction location |
Collision signal error |
|---|---|
|
Detection condition
|
• The door-electrical supply unit (driver's side) receives signal indicating that SAS control module detected malfunction.
|
|
Fail-safe
|
• Inhibits the auto door lock function.
|
|
Possible cause
|
1. DTCs are stored in the SAS control module. (Crash zone sensor malfunction or SAS control module malfunction) (See DTC TABLE [SAS].)
2. Door-electrical supply unit (driver's side) malfunction (Refer to [DOOR-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION] in workshop manual.)
3. Body control module (BCM) malfunction (Refer to [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION] in workshop manual.)
|
|
Repeatability verification procedure
|
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
|
|
System wiring diagram
|
• Not applicable
|