B1193:00 [SAS]
id9902k0112600
Details On DTCs
| System malfunction location |
SAS control module operation (deployment) |
|
|---|---|---|
|
Detection condition
|
Determination conditions
|
• SAS control module operates (deploys)(air bag module, pre-tensioner seat belts)
|
|
Preconditions
|
• Not applicable
|
|
|
Determination period
|
• Not applicable
|
|
|
Fail-safe
|
• Not applicable
|
|
|
Vehicle status when DTCs are output
|
• Not applicable
|
|
|
Possible cause
|
• SAS control module malfunction (SAS control module operation (deployment))
|
|
System Wiring Diagram
• Not applicable
Function Explanation (DTC Detection Outline)
• Not applicable
Repeatability Verification Procedure
• Not applicable
Function Inspection Using M-MDS
• Not applicable
Troubleshooting Diagnostic Procedure
| Step |
Inspection |
Results |
Action |
|---|---|---|---|
|
1
|
PURPOSE: INSPECT SAS CONTROL MODULE FOR MALFUNCTION DEPENDING ON REPEATABILITY
• Clear the DTC recorded in the memory. (See CLEARING DTC.)
• Perform the DTC inspection for the SAS control module. (See DTC INSPECTION.)
• Is the same DTC displayed?
|
Yes
|
Refer to the CAN (controller area network) malfunction diagnosis flow to inspect for a CAN communication error.
If the CAN communication is normal, replace the SAS control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
Repair completion verification 1
|
PURPOSE: VERIFY IF OTHER DTCs ARE DISPLAYED
• Perform the DTC inspection. (See DTC INSPECTION.)
• Are other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning location according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|