DTC Lookup

B10FE DTC

• Short circuit to passenger-side side air bag sensor No.1 and other air bag sensor circuits

Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector

Possible Causes

  • injury or damage the system due to a mis-operation. When performing an

SAS

B10FE:2B [SAS]

SM3591008

id9902k0808600

System malfunction location

• Short circuit to passenger-side side air bag sensor No.1 and other air bag sensor circuits

Detection condition

Warning
• Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection only under the detection conditions may cause injury or damage the system due to a mis-operation. When performing an inspection, always follow the diagnostic procedure.
• Malfunction in wiring harness between passenger-side side air bag sensor No.1 and SAS control module.
• Passenger-side side air bag sensor No.1 malfunction

Fail-safe

• (See DTC TABLE [DSC].)

Vehicle status when DTCs are output

• Not applicable

Repeatability verification procedure

1. Clear the DTC recorded in the memory. (See CLEARING DTC.)

Inspection/Action Procedure

• This DTC may be displayed due to the following DTCs. If the following DTCs are displayed, prioritize inspection/taking action.
― SAS control module (See DTC TABLE [DSC].)
• DTC related to internal malfunction
• DTC related to malfunction signal reception
• Inspect and take action in order from Step 1 below.
• After repairing or replacing a part, perform the repeatability verification procedure and perform a DTC inspection.(See DTC INSPECTION.)
― If the same DTC is displayed again as a result of the DTC inspection, go to the next step.

1.Verify the installation condition of the passenger-side side air bag sensor No.1.

If the passenger-side side air bag sensor No.1 is not correctly installed, install it correctly.

Purpose/reason (possible cause)
Poor passenger-side side air bag sensor No.1 installation
Applicable workshop manual items
PASSENGER-SIDE SIDE AIR BAG SENSOR No.1 REMOVAL/INSTALLATION

2.Inspect the wiring harness (including connector/terminal) between the passenger-side side air bag sensor No.1 and SAS control module.

Purpose/reason (possible cause)
Malfunction in wiring harness (including connector/terminal) between passenger-side side air bag sensor No.1 and SAS control module
Applicable workshop manual items

3.Inspect the passenger-side side air bag sensor No.1.

Purpose/reason (possible cause)
Passenger-side side air bag sensor No.1 malfunction
Applicable workshop manual items
PASSENGER-SIDE SIDE AIR BAG SENSOR No.1 INSPECTION

4.Replace the SAS control module.

Purpose/reason (possible cause)
SAS control module malfunction (applicable part malfunction determined by this DTC)
Applicable workshop manual items
SAS CONTROL MODULE REMOVAL/INSTALLATION

System wiring diagram

image
bda1jd00000916
1
SAS control module
2
Passenger-side side air bag sensor No.1

Function Explanation (DTC Detection Outline)

• Not applicable