B10D3:23 [BCM]
id990210575600
| System malfunction location |
Front request switch (RH) signal malfunction |
|---|---|
|
Detection condition
|
• The LF control unit detects that the value of the front request switch (RH) signal is continuously low.
|
|
Fail-safe
|
• Not applicable
|
|
Possible cause
|
1. Malfunction in wiring harness (including connector/terminal) between front outer handle (RH) and LF control unit (See CIRCUIT INSPECTION.) (See CONNECTOR INSPECTION.)
2. Front request switch (RH) malfunction (Refer to [FRONT OUTER HANDLE INSPECTION] in workshop manual.)
3. LF control unit malfunction (Refer to [LF CONTROL UNIT INSPECTION] in workshop manual.)
4. Body control module (BCM) malfunction (Refer to [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION] in workshop manual.)
|
|
Repeatability verification procedure
|
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
|
 |
|
|
1
|
LF control unit
|
|
2
|
Front outer handle (RH)
|