B10C6 DTC

Keyless antenna (exterior, rear) circuit malfunction

Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
Component Connector
  • 1. Malfunction in wiring harness (including connector/terminal) between keyless antenna (exterior, rear) and LF control unit (See CIRCUIT

B10C6:1F [BCM]

SM3339445

id990210108400

System malfunction location

Keyless antenna (exterior, rear) circuit malfunction

Detection condition
• The LF control unit detects an open circuit or short to ground in the keyless antenna (exterior, rear) circuit.
Precondition
• The ignition is switched off/main power switched OFF.
Fail-safe
• Inhibits the door lock/unlock control using the advanced keyless entry system.
Possible cause
1. Malfunction in wiring harness (including connector/terminal) between keyless antenna (exterior, rear) and LF control unit (See CIRCUIT INSPECTION.) (See CONNECTOR INSPECTION.)
3. Keyless antenna (exterior, rear) malfunction (Refer to [KEYLESS ANTENNA REMOVAL/INSTALLATION] in workshop manual.)
Repeatability verification procedure
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
2. Perform the following work:
― Switch the ignition off/main power OFF.
― Open the front door (driver's side).
― Close all the doors and trunk lid/liftgate.
image
1
LF control unit
2
Keyless antenna (exterior, rear)