B10A4:86 [ALH/AFS/ALV]
id990230199700
| System malfunction location |
Error signal received from swivel actuator (RH) |
|---|---|
|
Detection condition
|
• The adaptive front lighting system (AFS) control module received error signal from the swivel actuator (RH).
|
|
Fail-safe
|
• The swivel actuator (RH) is moved to the center or stopped at the position when the malfunction is determined.
• The swivel actuator (LH) is moved to the center.
• Control of the headlight auto leveling system is continued with the headlight leveling actuator positioned—0.65° from where the malfunction is determined.
|
|
Possible cause
|
1. Front combination light (RH) malfunction (Refer to [FRONT COMBINATION LIGHT REMOVAL/INSTALLATION] in workshop manual.)
2. Adaptive front lighting system (AFS) control module malfunction (Refer to [ADAPTIVE FRONT LIGHTING SYSTEM (AFS) CONTROL MODULE INSPECTION] in workshop manual.)
|
|
Repeatability verification procedure
|
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
2. Switch the ignition off.
3. Switch the ignition ON (engine on) and wait for 60 s. (Headlights move left/right during initial position learning.)
|
|
System wiring diagram
|
• Not applicable
|