B10A0:11 [BCM]
id990210106700
| System malfunction location |
Rear wiper switch circuit malfunction |
|---|---|
|
Detection condition
|
• The instrument cluster detects a short to ground in the rear wiper switch circuit.
|
|
Fail-safe
|
• Not applicable
|
|
Possible cause
|
1. Malfunction in wiring harness (including connector/terminal) between rear wiper and washer switch and instrument cluster (See CIRCUIT INSPECTION.) (See CONNECTOR INSPECTION.)
2. Rear wiper and washer switch malfunction (Refer to [WIPER AND WASHER SWITCH INSPECTION] in workshop manual.)
3. Instrument cluster malfunction (Refer to [INSTRUMENT CLUSTER REMOVAL/INSTALLATION] in workshop manual.)
4. Body control module (BCM) malfunction (Refer to [BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION] in workshop manual.)
|
|
Repeatability verification procedure
|
1. Clear the DTC recorded in the memory. (See CLEARING DTC.)
|
 |
|
|
1
|
Instrument cluster
|
|
2
|
Rear wiper and washer switch
|